How do you install a new coolant reservoir? - Chevy Malibu Forum: Chevrolet Malibu Forums
LinkBack Thread Tools Display Modes
post #1 of 3 (permalink) Old 12-05-2012, 11:10 AM Thread Starter
CMF Rookie Member
Join Date: Jan 2011
Location: Vegas
Posts: 11
How do you install a new coolant reservoir?

I have a 2003 Malibu LS and the coolant reservoir just recently cracked on me so I am going to replace it, only $35. It looks like a fairly simple replacement, just one bolt and a few hoses. My question is, does the coolant fluid need to be flushed or is it possible to do the replacement with the coolant still in the car; also, there is also coolant in the cracked reservoir so how do I do the replacement with fluid still in the tank?
Thanks in advance.
kpointer25 is offline  
Sponsored Links
post #2 of 3 (permalink) Old 12-06-2012, 08:57 PM
CMF Veteran Member
RalphP's Avatar
Join Date: Feb 2010
Location: Northwest Louisiana
Posts: 1,237
Re: How do you install a new coolant reservoir?

When you pull the hoses, some of the coolant will leak out. What you do is after you're done replacing the tank, refill it.

Or better, take this as a warning, pull all the hoses and replace them, and put a fresh charge of distilled water and good quality antifreeze in.


335K miles on original motor and tranny (only motor work 2 x LIM replacement), Monroe SensaTrac struts front and back (new at approx. 300K miles), and Alero discs in back. LS fogs added with custom wiring. HID high beams, HIR low and halogen fogs. Raybestos Pro Grade front rotors and Bendix D747 ceramic pads on front.

Addendum: Rest in peace. Surge tank blew, motor overheated, I think she's lived a long and useful life.
RalphP is offline  
post #3 of 3 (permalink) Old 12-09-2012, 12:41 PM
CMF Rookie Member
Join Date: Nov 2012
Posts: 4
Re: How do you install a new coolant reservoir?

Yes, it's fairly easy. I replaced mine just last weekend as part of a coolant flush while working a clogged heater core. Mine was so old and dirty that I couldn't see the Full Cold mark.

You could drain some of the coolant from the radiator to minimize the amount of coolant in the reserve tank. Then, as you say, it's just one bolt and one plastic retaining clip - aside from the connecting hoses.
golferwannabe is offline  
Sponsored Links

Quick Reply

Register Now

In order to be able to post messages on the Chevy Malibu Forum: Chevrolet Malibu Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
Low coolant scott37300 Problems/Service Issues/Troubleshooting (Generation 7) 26 03-20-2013 06:32 PM
Coolant change ElantraMax Do It Yourself Maintenance (Generation 7) 3 06-09-2011 12:25 PM
02 Malibu LS leaking coolant from reservoir ciangu Problems/Service Issues/Troubleshooting (Generations 5 & 6) 1 06-03-2011 05:43 AM
Low coolant warning SidewaysLS4 Problems/Service Issues/Troubleshooting (Generations 5 & 6) 5 01-04-2011 10:20 AM
crack in break master cylinder reservoir nbma Problems/Service Issues/Troubleshooting (Generation 7) 7 05-30-2010 01:43 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome