|
ectar 10-23-2009, 06:12 PM I want to put HIDs into my car, why not happy with brightness of stock. But I have concern over blinding other ppl with glare... please advise me if such modification possible... if yes what should I do? ChevyFreak 10-23-2009, 11:33 PM It's possible but you would have to do much more work then just simply swaping in a plug and play kit. I don't know the malibu aftermarket support but your options are retro fit a stock setup form another car into the stock light housing. There is also if available buying a projector headlight housing and going from there. I had HID in my stock housings on my Silverado and it was pretty bad for blinding people. I had to turn my lights down to the ground quite a bit but also it was lifted 13 inches so that didn't help with blinding people either. I do not recommend using a plug an play kit but if you do decide to go that route try ddmtuning.com (http://www.ddmtuning.com) they have kits that are only 40 dollars for the raptor kit. I would suggest getting the relay kit to draw power from the battery though. Macleod52 10-24-2009, 07:35 AM Retrofit a set of OEM projectors into your stock housing. Not only will you be able to use quality OEM bulbs, but you'll have no hot spots on the road (unlike with a kit), have a better beam pattern, and not have to worry about blinding others. Try going to www.hidplanet.com ectar 10-24-2009, 08:43 AM Thank you for reply! But I cannot understand what product will fit Maliby MAXX with H11... unless I will ask them specifically.... plus a lot of their products discontinued! golly 08-01-2010, 06:40 PM Not happy with stock brightness? I am very happy with the brightness in our 05 Maxx. It's way brighter than our 2000 Silhouette. | ||