ok, got time tonight so went to the Pops garage since its heated and mine is full of crap so here it is. Went alot easier then i was planning for...had apart and all back together after about 2hrs with mainly trying to figure out the headlight cup and there just wasnt enough room once the cap goes on to drill a hole and use the grommet so i notched the bottom of the headlight just enough to get the 2 wires through so here they are. Gotta adjust them a bit to my liking but here ya go...
Wiring harness on driver side i taped into for the signal wires of the relay harness and added a H11 plug so there isnt any cutting of factory wiring
Here is the H11 plug i added for the relay harness
Relay mounted(temporaily til i find bracket or another relay with bracket
Ballast mounted on brace
HID wires coming out of headlight