Does anyone know where i could buy the air cleaner outlet duct clamp that goes over the throttle body. The only thing I have found was the whole cover which would cost too much. I just need the rubber part. #2 on the picture.
2.4L Air Cleaner Outlet Duct a.k.a. Engine Cover
Air Cleaner Outlet Duct Replacement on 2.4L
1. Reposition the hose clamp (1) away from the end and remove the PCV hose.
2. Loosen both of the outlet duct clamps (2).
3. Pull the air cleaner outlet duct (3) straight up to detach the ball studs.
Tighten clamp (2) to 4 N·m (35 lb in).
![]()
1. Reposition the hose clamp (1) away from the end and remove the PCV hose.
2. Loosen both of the outlet duct clamps (2).
3. Pull the air cleaner outlet duct (3) straight up to detach the ball studs.
Tighten clamp (2) to 4 N·m (35 lb in).
