Chevrolet Malibu Forums banner

Changed Serp Belt

3580 Views 2 Replies 2 Participants Last post by  ElantraMax
Hi all. Changed my Serpentine Belt today. On my 2008 Malibu 2.4. It wasnt hard. Very tight getting in there. Had to loosen the Splash Shields on the passenger side. Already had the tire off from Rotating the tires. Used a 3/8" Drive long ratchet to push back the tensioner. Installed a GoodYear Gatorback # 4050405. Sorry I dont have any pics. Had to Remove about 15 Plastic "Trees" to loosen the splash shields. And hang them out of the way.

Also did an oil change as well.

Next project? Possibly the Spark Plugs.
Status
Not open for further replies.
1 - 1 of 3 Posts
Thanks for the tips. Was there anything wrong with the belt, though?

P.S. So, post no. 500 makes one a "CMF Veteran Member.":D
1 - 1 of 3 Posts
Status
Not open for further replies.
Top