I also noticed that the high beam lights barely glow when remote starting. The driver side high beam wont work when turned on but glows when starting. The passenger side works perfectly. I feel I'm going to have to replace the damn wiring harness again. I'm tired of removing that damn bumper fascia.
What you describe continues to sound like a bad ground.
Pop the bumper one more time (sorry), then inspect every ground from each headlight housing. Where it goes through the master connector at each side and to the chassis need to be 100% working to keep from having half-glowing headlights.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.