[djwirthless]

Does anyone know how to replace the seat belt and retractor? The car was in a small accident and now the seat belt is locked up and I know you have to replace them then. Anyone have a diagram or mabye some instructions? Thanks!

 

[Starship]

In order to get to the retractor mechanism in the center pillar:

http://cid-54465800aad91b49.office.live.com/self.aspx/pub/2139050.GIF
http://cid-54465800aad91b49.office.live.com/self.aspx/pub/2001527.GIF

The rears are easier:

http://cid-54465800aad91b49.office.live.com/self.aspx/pub/2001580.GIF
http://cid-54465800aad91b49.office.live.com/self.aspx/pub/2003085.GIF

Be sure to disable the SIR system first (there're a couple of ways to disable/enable; search online).

 

[djwirthless]

awesome thanks! Would just disconnecting the battery work to disable it the sir system?

 

[Starship]

The SIR sensing and diagnostic module (SDM) has two power inputs through fuses labeled AIRBAG (IGN) and AIRBAG (BATT). Disconnect the battery or pull the fuses (with the key OFF) but, in either case, beware that it may take 10 minutes or longer for the reserve deployment energy to dissipate from the SDM. Also, yellow electrical connectors (with safety locking CPA clips) are strategically located in the paths to impact sensors and air bag modules.