[Marshmellow_Malibu]

Hey guys, I've been in the process of LTZ'ing my LS and now I've moved onto my interior. I've already did fog lights, LED taillights, dual exhuast and now I'm going with the brick and ebony interior for my LS instead of the gray cloth panels and seats. I have a question for the power seats though and also the heated seats option on my new seats. What will I need to enable the power seats and the heated seats functions? I believe a wire harness is needed for the power seats but how would I connect the harness? Also will I need a harness for the heated seats? Thanks guys

 

[DrivenDaily]

Not sure what year you're working on, or what year the seats are from, as you don't have a signature and your avatar doesn't have that info filled out as well. You may want to consider updating that.

Since you posted in this area I'll assume you're working on a Gen7. Here's a link to my DropBox. It has the schematics for 2008. Very few changes overall since then. The '08 models had the fender-mounted turn signal repeaters that were discontinued for '09, but other than that there will be only a few differences. Like for '10 they moved the mirror adjuster off the sail panel to the window switch panel, and the door locks from there to the door cups, and for either '10 or '11 (not sure) they moved the paddle shifters to a single button on the shifter stalk.

Happy electrifying!

http://dl.dropbox.com/u/4191695/08_chevy_malibu_complete.pdf

 

[Marshmellow_Malibu]

ahhh yess, sorry about that! I own an 08 and I purchased seats from an 09, thank you very much for the schematics! Ill post pics of my LS to LTZ conversion when I'm done